DEPARTMENT OF ELECTRONICS AND COMMUNICATION
ENGINEERING
SUBJECT CODE:CY1201
ENVIRONMENTAL SCIENCE&ENGG
TWO MARK QUESTIONS-ANSWERS
PREPARED BY
1. S.EMERALD SHIA (L/ECE)
2. R.KALAIVANI (L/EEE)
3. L.FREESIE GRETA (L/CSE)
CY1201 - PRINCIPLES OF ENVIRONMENTAL SCIENCE AND ENGINEERING
2 MARKS
1. Define environment.
‘Environment’ is derived from the French word Environner which means to
encircle or surround. All the biological and non-biological things surrounding an
organism are thus included in environment. Thus environment is sum total of water, air
and land, inter-relationships among themselves and also with the human beings, other
living organisms and property.
2. Write down the components of environment.
The components of environment can be broadly divided into two
1. Abiotic components - composed of all the non living components like
temperature, water, minerals and gases etc
2. Biotic Components - composed of all the living components-plants, animals
and micro-organisms.
The Abiotic components include: 1.Lithosphere 2. Hydrosphere 3.
Atmosphere
The Biotic components include : 1, Producers 2. Consumers 3.
Decomposers
3. Write notes on troposphere
This is the lowest layer of atmosphere. It extends up to 10-12km at mid latitudes,
5-6 km around poles and up to 18 km at equator. It contains water vapors, clouds and
important gases like oxygen and nitrogen. The temperature in this region decreases at the
rate of 5-7 degree centigrade per km.
4. Write notes on Stratosphere
This layer extends up to 50 km above the earths surface. This is a stable layer and
it consists of dry air. The main chemical species of this region is ozone. It protects human
beings from ultra violet radiation, which are emitted from the sun.
5. Write notes on Thermosphere
This layer exists up to 500km above the earth’s surface. The heating of the
thermosphere is due to the absorption of solar energy by atomic oxygen. With in this
layer is the relatively dense band of the charged particles called ionosphere. Worldwide
communication is done using this layer.
6. Why are plants called as producers?
The green plants have chlorophyll with the help of which they trap solar
energy and change it into chemical energy of carbohydrates using simple
inorganic compounds namely water and carbondioxide.As the green plants
manufacture their own food they are known as Autotrpohs.
7, Write the classification of biological environment.
1. Floral/Plant Environment
2. Faunal /Animal Environment
3. Microbial environment
8. What is the structural features of ecosystem?
Composition and organization of biological communities and abiotic components
constitute the structure of an ecosystem
i)Biotic structure:- The plants, animals and microorganisms present in the
ecosystems form the biotic component.
ii)Abiotic structure:- The physical and chemical components of an ecosystem
constitute its abiotic structure. It includes climatic factors, soil factors, geographical
factors, energy, nutrients and toxic substances.
9. What is meant by biotic structure?
The plants, animals and microorganisms present in the ecosystems form the biotic
component. It is classified in to, a) Producers, b) Consumers and c) Decomposers
10. What is meant by abiotic structure?
The physical and chemical components of an ecosystem constitute its abiotic
structure. It includes climatic factors, soil factors, geographical factors, energy, nutrients
and toxic substances. They are classified in to a)Physical factors and b)Chemical factors.
11.What are called Producers?
Producers are mainly the green plants, which can synthesize their food themselves
by making use of CO2 present in the air and water in the presence of sunlight by
involving chlorophyll, through the process of photosynthesis. They are also known as
photo autotrophs.
12. What are called consumers?
All organisms which get their organic food by feeding upon other organisms are
called consumers. The consumers are of the following types,
a)Herbivores
b)Carnivores
c)Omnivores
d)Detritivores
13. What are called Decomposers?
They derive their nutrition by breaking down the complex organic molecules to
simpler organic compounds and ultimately in to inorganic nutrients. Various bacteria and
fungi are decomposers.
14. Define ecology.
Ecology is defined as the study of relationship between organisms and their
environment.
15. Define Ecosystem.
An ecosystem is defined as a natural functional ecological unit comprising of
living organisms and their non- living environment that interact to form a stable selfsupporting
system.
16 . Define energy flow in an ecosystem.
The flow of energy from one trophic level to next trophic level with in an
ecosystem is called energy flow in an eco system.
17. Explain food chain
In food chain each organism eats the smaller organism and is eaten by the larger
ones. All these organisms which are interlinked with each other through food together
constitute a food chain.
16.What is meant by Grazing food chain?
It starts with green plants (primary producers) and culminates in carnivores.
Eg: Grass-grasshopper-Frog-Snake-Hawk.
17.What is meant by Detritus food chain?
It starts with dead organic matter which the detritivores and decomposers
consume. Partially decomposed organic matter and even the decomposers are consumed
by detritivores and their predators.
Eg:- Leaf litter-algae-crabs-small carnivores fish-large carnivorous fish
(Mangrove ecosystem)
Dead organic matter-fungi-bacteria.
18. Explain food web.
Various food chains are often interlinked at different trophic levels to form a
complex interaction between different species from the point of view of food. This
network is called the food web.
19. Define nutrient cycle/ Bio-geochemical cycle/ material cycle.
The cyclic exchange of nutrient material between the living organisms and their
non-living environment is called nutrient cycle. As indicated by the name, the nutrients
circulate through life (bio) and through earth (geo) repeatedly (cycle)
20. Name some of natural impacts on environment.
Some of the natural impacts are
1. Earthquake
2. Tsunamis
3. Flood
4. Volcanic eruption
21. Name some of the anthropogenic impacts on environment.
1. London Smog
2. Mediterranean a dead sea
3. Nuclear explosions
4. Minamata disease
5. Bhopal disaster
6. Chernobyl disaster
7. Gulf war hazards
22. State the theory of classical economics
Adam smith and Thomas Malthus in 1700’s developed the theory of classical
economics, according to this view “ as the population grows, the increasing scarcity of
the finite resources the quality of life, increases competition and ultimately causes
population to fall”.
23. Define sustainable development
sustainable development can be summarized as ‘meeting the needs of the present
without compromising the ability of future generations to meet their own needs.
24. Explain the concept of sustainable development
The concept of sustainable development has the following underlying promises.
1. A symbiotic relationship between the consumer human race and the producer
natural system.
2. Compatibility between ecology and economics.
25. Write short notes on photosynthesis.
The process by which chlorophyll bearing plants use energy from the sun to
convert carbon dioxide and water into sugars is called photosynthesis. The
generalized equation for photosynthesis is,
26. Define mole.
Mole is defined as the amount of substance present in a material. The
term mole can be applied to any particle. In general it is the ratio between
mass and molecular weight of a particle.
27. Define pH.
It is the logarithmic scale used to specify whether a solution is acidic,
basic, or neutral.
28. Define molality.
Molality is defined as the number of moles of solute dissolved in 1000gm
of the solvent.It is another common measurement of concentration
Molality = Number of moles of solute
Weight of solvent
29. Define Molarity.
Molarity is defined as the number of moles of the solute present in 1000ml
of the solution.
Molarity = Number of moles of solute
Volume of solution
30. Define Hardness of Water.
Hardness of water is defined as the property of Water which consumes
more soap to produce foam or lather. It is due to the presence of certain salts
of calcium, magnesium and other heavy metals dissolved in it.
31. Differentiate between Temporary hardness and Permanent hardness
Temporary hardness is due to the presence of dissolved bicarbonates of calcium,
magnesium and other heavy metals and the carbonates of iron. It is mostly destroyed
by heating.
Permanent hardness is caused due to the presence of chlorides and
sulphates of calcium, magnesium, iron and other metals. This is not
destroyed by heating.
32. Define buffering capacity of water.
Buffering capacity is the ability of water to maintain a stable pH value
even if acids or bases are added.
33. Define Turbidity.
Turbidity in water is a measure of the resistance of water to the passage
of light through it.
34. Define permeability of soil,
It is defined as the ability of movement of water through the pore spaces
of soil particles.
35. What are the principle nutrients required for algae.
i) Nitrogen
ii) Phosphorus
iii) Carbon dioxide
36. List the properties of acid and base.
A solution for which the hydrogen ions are greater are than the hydroxyl ions, it is
called as acid.
A solution for which the hydroxyl ions are greater than hydrogen ions, it is
called as base.
37. Define Chemical oxygen Demand
This is defined as the amount of oxygen required for chemical oxidation of
the organic matter and other reducing agents present in waste water.
38. List some physical properties of water.
Color
Temperature
Turbidity
Taste and odour.
39. Define Bio chemical oxygen demand.
BOD is defined as the quantity of dissolved oxygen required by bacteria
for the oxidation of organic matter under aerobic conditions
40. What is an point source pollution.
Polluted water discharged from specific locations such as drain pipes,
ditches, etc. are called point source pollution.
41. What is an non-point pollution ?
Water pollution caused in a scattered or diffuse manner having no specific
origin or point of entry into a particular body of water are called non-point
pollution sources.
42. List the different types of fresh water algae?
i)Green algae ii)Motile green algae iii)Blue green algae. iv)Brown algae.
43. Explain the basic classification of micro organism.
i) Bacteria ii) Fungi iii) Algae iv) Protozoa v) Viruses
44. What is an indicator organism?
The detection of pathogens in routine water analysis is difficult,
uneconomical and impractical. Instead water is tested using a surrogate that
is an indicator of fecal contamination.
Example: total coliforms, fecal streptococci and clostridium perfingens
45. Calculate the number of moles of CO2 in 44 g of CO2?
Number of moles = Mass / Molecular Mass
= 44 / 44
=1 mole.
46. Calculate the pH of a solution with [H+]=3.4x10-4 mol/l
pH = - log10[H+]
= - log10(3.4) – log10(10-4 )
= - 0.534 + 4
= 3.47
47. What is a policy?
A policy is a plan or statement of intent –either written or stated – about a
course of action or inaction intended to achieve certain goals.
48. Write the pH of i)Human blood ii)Lemon juice iii)Wine iv)Distilled water
Human blood : 7.5
Lemon juice : - 2
Wine : - 4
Distilled water : 7
49. What is an saturated solution?
This is a solution, which contains as much solute as it can dissolve in the
presence of solvent at a given temperature.
50. Name all the mass/mass units used for representing concentration of
solution?
i)percent by weight
ii)parts per million
iii)molality
iv)mole fraction
51. What is meant by air pollution?
Air pollution may be defined as the presence of impurities in excessive quantity
and duration to cause adverse effects on plants, animals, human beings and materials.
52. What are the main sources of air pollution?
Natural sources and
Man made or anthropogenic sources
53. List the types of air pollutants.
Particulate pollutants
Gaseous pollutants
54. What do you understand by suspended particulate?
Suspended particulate matter is a complex mixture of small and large particles
with size less than 100μ varying origin and chemical composition. The largest source
of particulate matter is coal-fired power plants, but auto and diesel exhaust are also
prime contributors, especially along busy transportation corridors.
55. Write short note on color-coding of biomedical waste.
In order to dispose the biomedical waste safely and economically it is necessary
to collect the waste by suitable segregation. The system of using different color bags
to collect different types of medical waste is known as color-coding. The biomedical
waste can be divided into 3 categories according to the colors,
Yellow bag waste - Eg: Human anatomical waste-Should be incinerated or
deeply buried Red bag waste - Eg: Plastic waste-Should be disinfected
with chemicals
Black bag waste - Eg: Incinerated ash-Should be disposed for landfills.
56. How can exhaust reduction be done in vehicles?
The exhaust deduction in the vehicle may be achieved to some extend by adopting
the following technique.
Catalytic converters
Manifold air injection
Fundamental engine modification
57. Write short note on radioactive property of hazardous waste.
In the spontaneous break down of the nucleus of an atom, mainly three types of
radioactive materials are found to be hazardous namely:
a particles, b particles, g radiations.
The a particle emission occurs mainly in radioactive isotope and the b radiations
are the electron released from a radioactive nucleus. The g radiations are
electromagnetic radiation traveling at speed of light.
58. How can you control the emission of nitrogen oxides? OR Explain EGR
method.
Since high temperature favors the production of nitrogen oxide, the emission may
be controlled by lowering the combustion temperature. This can be achieved by recirculating
the exhaust gases, which will no longer burn. Hence it will not produce
any heat if re-circulated and will quench the heat of the combustion gases. This
method is called Exhaust Gas Recirculation(EGR). The temperature in the cylinder
ranges from 500oC and the end of compression stroke (before ignition) to about 3000-
oCts, disturbances and
organisms across the area.
62. What are the main components of municipal solid waste?
Garbage (or) food waste
Rubbish
Ashes and Residues
Special wastes
Construction and demolition wastes
Treatment plant waste
63. Define green house effect.
The green house effect is a naturally occurring process that makes the earth
warmer by trapping more energy in the atmosphere. The green house gases absorb
and hold heat from the sun, preventing it from escaping back into the space.
64. Define global warming
Global warming is defined as the increase in temperature of the earth, which
causes more changes in climate.
65. What are the effects of global warming?
More heat waves
Expansion of desert area
Natural fires in forest land
More evaporation of water from oceans and water bodies
Melting of ice caps in artic and Antarctica regions
More cloud formation in the atmosphere
Rise in sea level
More drought
More impacts on plants, animals and humans.
66. Define screening and skimming.
The process of removing the large matters from sewage by allowing it to pass
through screens is called screening.
The process of removal of floating matters such as oils, grease, etc by skimming
tanks is called as skimming.
67. Name any three disinfection method
Chlorination, Ozonation, UV treatment
68. What are the types of autoclave systems used in treatment of biomedical
waste?
Gravity system
Pre vacuum system
Retort type systems
69. When is a waste said to be hazardous?
A waste is said to be hazardous if it posses one or the more of the following
characteristics
Toxicity
Reactivity
Ignitability
Radioactivity
Corrosivity
70. What are major vehicle pollutants?
The major pollutants due to vehicles are
Carbon monoxide
Hydrocarbons
Oxides of nitrogen
Lead components and
Suspended particulate matter.
71. Write short note on nitrification / denitrification
An approach to nitrogen control utilizes aerobic bacteria to convert
ammonia(NH4
+) to (NO2
-) which is nitrification followed by an anaerobic stage in
which different bacteria converts nitrates to nitrogen gas(N2) which is denitrification.
The overall process is referred to as nitrification / denitrification.
72. Explain drying and dewatering.
The shredded waste material is pre-dried to decrease its weight by removing the
amount of moisture. If there is any need for incineration of sludge from treatment
plants, then dewatering is essential.
73. What are the two main classifications in sources of radioactive pollution?
Natural sources
Man-made sources
74. What is half-life of a radioactive substance?
The half-life of a radioactive substance is defined as the time taken for decaying
half of the material present.
75. What are the factors to which the effect of radioactive pollutants depend on?
Duration of exposure to the radiation
Strength of the radiation
Half life period of the radioactive pollutant
Rate of diffusion of the pollutant
Environmental conditions
76. What is DRE?
DRE refers to the destruction and removal efficiency that evaluates the
measurement of qualitative functioning of an incinerator. A DRE value of 99.99
indicates that one molecule of an organic compound is released in to the atmosphere
for every 10,000 molecules of pollutant treated by the incinerator.
77. What is flow diagram and what are its advantages?
Flow diagram is a graphical representation of various processes involved in
various methods of treatment plant. The advantages are
i) It shows the sequential processes involved in a particular type of treatment
method.
ii) Easy to understand and can easily identify if anything goes wrong.
78. What are the objectives of waste minimisation?
i) Reduced hazard to human health from the generation of toxic wastes.
ii) Preventing environmental degradation caused by unnecessary release of
waste materials.
iii) Reduced the waste disposal and its cost reduction.
79. What are the factors involved in the amount of waste generation process?
i)House keepinng practices
ii)Extent of process control.
iii)Product quality requirements and initiative.
iv)Managing system and initiative.
80. What is the aim of national committee of environmental planning and coordination.
i)Conservation of natural resources.
ii)Control of environmental pollution.
iii)Environmental education.
iv)Environmental laws.
81. What is waste treatment?
Waste treatment technique or process change the physical,chemical and biological
character of waste.
82. What are the objectives of waste treatment?
i)To recover the material or energy resources from the waste.
ii)To neutralise the waste.
iii)To reduce the volume of waste.
83. What is an clean technology?
Clean technology is an integrated preventive environmental and business strategy
which uses fewer raw materials, less energy and generate less waste than an existing
technology. It produces products and provide services at a higher efficiency
,increased profitability and reduces risk to the environment.
84. What are the advantages of clean technology?
i)It helps to use fewer raw materials and energy and generate less waste.
ii)It helps to ensure worker safety.
iii)It reduce the impacts for products along the entire life cycle from material
extraction to disposal.
85. What are the steps to be taken to implement cleaner production in an
industry.
i)Undertake environment review and create the awareness of environmental
issues.
ii)Establish environmental policy duly acknowledged by the executive officer.
iii) Carry out environmental audit on suppliers of services.
86. What do u mean by end of pipe approach?
In this case waste treatment is done at the end of pipe (ie) after the manufacturing
process is over. Steps are taken to mininise the waste during the manufacturing
processes and also the generated wastes are not reused. Therefore ,the waste treatment
alone is called End of Pipe approach.
87. What is environmental waste audit?
The most important process, which reveals the actual generation of waste in an
industrial unit, is the waste audit.
88. What are the important points of good waste audit?
i) Help set targets for waste reduction.
ii) Increase knowledge of the production process.
iii)Help to improve process efficiency.
89. How the waste audit is divided?
a) Pre assessment
b) Material balance
c) Synthesis.
90. What is disposal?
Disposal is the discharge, deposit, injection, dumping, spilling, leaking or placing of waste in
to or any land, water or air.
91. What is standard of performance?
The minimum allowable concentration of each chemical agent in a waste water or
effluent that is prepared by suitable acts or amendments is called standard
performance.
92. What is the objective role of standards of performance in the control of
pollution?
The standards of performance function to monitor and assess the overall
concentration of toxic pollutants in the effluent and enable the analyst or investigators
to check whether the prescribed limit of those pollutants do not exceed the allowable
level.
93. Mention the standards of a few chemical parameters in the oil refinery
industry.
1.Phenol 0.7 kg/1000 tones of crude processed
2.Sulphide 0.35 kg/1000 tones of crude processed
3.BOD at 200c 10.5 kg/1000 tones of crude processed
4.Suspended solids 14 kg/1000 tones of crude processed
94. Mention the standards of a few chemical parameters in the cotton textile
industry
1.pH 5.5 to 9.0
2.Suspended solids 100 mg/lit
3.BOD at 20 0 c 150 mg/lit
4.Sulphides 2.0 mg/lit
5.Total chromium content 2.0 mg/lit
95. What is the percentage removal of suspended solids and BOD in primary
treatment?
The primary treatment is aimed to remove 60% of suspended solids and
40% of BOD.
96. What are the elements of waste minimisation strategy?
a. Reduction at source
b. Recycle/Reuse
c. Treatment
d. Disposal.
97. What are the possible solutions of waste disposal?
i)Install a fume incinerator.
ii)Install a condenser to recover the solvent for reuse
98. What is MINAS?
Effluent standards were designed on techno economic grounds called the ’Minimal National
Standards’
99. What is LSS?
Effluent standards are calculated on the basis of the assimilative capacity of the receiving
environment, called the ‘Location Specific Standard’
100. What are the operations included in ETP?
The operations included in ETP(effluent Treatment Plants) are
i)Blending
ii)Equalization
iii)Neutralization
iv)Precipitation
v)Chemical or Biological Oxidation
101. Define Environmental Impact Assessment.
Environmental Impact Assessment (EIA) can be defined as the systematic identification and
evaluation of the potential impacts (effects) of proposed projects, plans, programs, or legislative
actions relative to the physical-chemical, biological, cultural, and socioeconomic components of
the total environment.
102. Write down the objective of EIA:
The objective of Environmental Impact Assessment (EIA) is to ensure that
environmental aspects are addressed and potential problems are foreseen at the
appropriate stage of project design. EIA should be envisaged as an integral part of
the planning process and initiated at the project level from the start.
103. What is the need of EIA?
All the developmental activities are proposed to facilitate the public. For that the resources are
used more and that may alter and affect the environmental parameters. Hence this EIA is
carried out in order to ensure the depletion of resources and the alterations and effects on the
quality of environmental parameters.
104. What are the goals of EIA?
The goals of EIA are:
Conservation of resources.
Minimization of wastes.
Recovery of by-products.
Utilization of efficient equipments.
105. List the key elements of EIA.
Organizing the job.
Assessment performance.
Preparation of Environmental Impact Statement.
Reviewing of Environmental Impact Statement.
Approval of Plan with or without modifications.
106. Define Environmental Impact Statement (EIS)
An Environmental Impact Statement (EIS) is a detailed written statement
which serves as an action-forcing device, provides full and fair discussion of
significant environmental impacts and must inform the decision makers and
public the reasonable alternatives which would avoid or minimize adverse
impacts or enhance the quality of human environment.
107. Write down the types of EIA:
There are two types of EIA.
i. Rapid EIA
ii. Comprehensive EIA
Rapid EIA is done quickly based on one season data whereas
Comprehensive EIA will be detail and normally takes at least one year for its
preparation.
108. Write down some of the benefits of EIA:
The benefits of the EIA are,
i. Reduce cost and time of project implementation
ii. Increase project acceptance and improve project performance.
iii. Avoid impacts and violations of laws and legislations.
iv. Improved human health and maintenance of biodiversity.
v. Decreased resource use and fewer conflicts over natural
resource use.
109. Write down the major objectives of ISO 14000 series:
The major objectives of ISO 14000 series is to promote more effective and
efficient environmental management in organization and to provide useful and
usable tools-ones that are cost-effective, system based, flexible and reflect the
best organizational practices available for gathering, interoreting and
communicating environmentally relevant information. The intended end result is
the improvement of environmental performance.
110. Write down the subjects covered under various ISO 14000 :
ISO 14000 – 14009 : Environmental Management Systems
ISO 14010 – 14019 : Environmental Audit
ISO 14020 – 14029 : Environmental Labeling
ISO 14030 – 14039 : Environmental Performance Evaluation
ISO 14040 – 14049 : Life Cycle Assessment
ISO 14050 – 14059 : Terms and Definitions
ISO 14060 : Environmental Aspects in Product Stand
111. Write down the key requirements specified under ISO 14000:
The key requirements specified under ISO 14000 are,
vi. Environment access
vii. Planning
viii. Implementation and operation
ix. Checking and corrective action
x. Management review
112. Write notes on Precautionary Principle:
The precautionary principle emphasizes that we should plan a margin of
safety for error or surprises in natural systems. In other words, when human
health or the environment are threatened, precautionary measures should be taken
even if cause-and-effect relationships are not fully established scientifically.
113. What is the beneficiary pays principle?
According to this principle,’ the people who get benefited due to an activity,
which increases the pollution, should pay for that’.
114. What do you know about risk management?
Risk management is a process of resolving various policies regarding
acceptable risk. It consists of risk assessment and risk control.
115. Define risk assessment?
Risk management is defined as the process of identifying, quantifying and
evaluating the risk. . It contains risk determination and risk evaluation.
116. What are the activities covered in risk assessment?
Risk identification.
Risk estimation.
Risk acceptance.
Risk aversion.
117. Write notes on Polluter Pays Principle:
The basic environment law of the land requires that a polluter bear the
remedial or clean-up costs as well as the amount payable to compensate the
victims of pollution. This is known as the ‘polluter pays princial quality, natural resources and ecological sustainability.
121. What are the major constitutional provisions in India for environmental
protection?
Article 47.
Article 48-A.
Article 51-A (g).
Article 253.
122. State the Article-47 of the Indian Constitution.
Article 47 of the Constitution states that, "The State is to ensure as its primary duty
of,
1.Raising standard of living of its people,
2.To increase the level of nutrition of the people,
3.To bring improvement in public health".
123. State the Article 48-A of the Indian Constitution.
Article 48-A of the Constitution states that, "the State shall endeavor for
protection and improvement of the environment and for safeguarding the forest and
wild life and improving the natural environment of the country".
124. State the Article 51-A(g) of the Indian Constitution.
According to Article 51-A(g) of the Constitution, it shall be the duty of every
citizen of India 'to protect and improve the natural environment including forests,
lakes, rivers ,and wild life and to have compassion for living creatures'.
125. State the Article 253 of the Indian Constitution.
Article 253 of the Constitution empowers the parliament to make laws regarding
preserving the environment. It states 'The parliament has power to make any law for
the whole or any part of the territory of India for implementing any treaty,
agreement or convention with any other country or countries or any decision made
at any international conference, association or other body'.
126. List the major environmental conventions of 20th century.
1.World summit on sustainable development
2.The Earth Summit
3.World conference on women.
127. Name some of the acts enacted by the Indian Government to protect the
environment.
1.The Water (prevention and control of pollution) Act 1974
2.The Water (prevention and control of pollution) Cess Act 1977
3.The Air (prevention and control of pollution) Act 1981
4.The Environment (protection) Act 1986
5.The Public Liability Insurance Act 1991.
128. What are the common objectives of environmental legislation?
All the Acts were enacted to achieve the following:
1.To control further damage to the environment and ecosystem
2.To conserve the environment
3.To restore the environment in areas damaged including such measures as
reclamation of degraded land.
4.To create authorities to administer the policy and contents of the legislation.
5.To provide penalties and prosecution for violation of laws.
129. List the major environmental protocols of 20th century.
1.Kyoto protocol
2.Montreal protocol.
130. Write notes on NGOs:
The groups working for social changes are called Non-Governmental
Organizations (NGOs). When the activities are concerned with environmental
issues they are called environmental NGOs.
131. Write notes on ‘Green Peace’:
‘Green peace’ is one of the largest NGOs in the world with 1.6 million
contributing members, carries out well-publicised confrontations with toxic waste
dumpers, seal hunters and others who threaten very specific and visible resources.
132. List some of the NGOs available in India.
1.World Wide Fund for Nature India.
2.Indian Environmental Association, Mumbai.
3.Environmental Society of India (ESI), Chandigarh.
4.Sastrakalayatha, Kerala.
5.C.P.Ramaswami Ayer Environmental Education Centre.
6.Centre for Environmental Education, Ahmedabad.
7.Friends of River Narmada.
8.Madras Environmental Society, Chennai.
9.Eklavya, Madhya Pradesh.
10.SEARCH, Bangalore.
133. How does the community participation involve in protecting the
environment?
Community participation requires involvement in several areas:
1.Better theoretical knowledge about the environmental information (both
Scientific and traditional)
2.Better practical guidelines and tools are need.
3.Better educational support.
4.Ethical inconsistencies in environmental decision-making are illuminated
and kept to a minimum.
134. Write short notes on the history of implementation of international
treaties and conventions.
Over the past 25 years, more than 170 treaties and conventions have been
negotiated to protect our global environment. These are mainly designed to
regulate the following activities:
3. Intercontinental shipping of hazardous waste
4. Reforestation
5. Over-fishing
6. Trade in endangered species
7. Global warming and
8. Wildlife protection.
135. Mention the standards in EPR:
There are three types of standards mentioned in Environment Protection Rules (EPR),
a. Source standards, which require the polluter to restrict the emission and discharge
of environmental pollutants at source.
b. Product standards, which fix the pollution norms for new manufactured products
such as car.
c. Ambient standards, to set maximum pollutant loads in the air and to guide
regulation on the environmental quality that ought to be maintained for healthy
living.
136. Write notes on environmental law in ancient period in India:
Production, conservation and judicious use of natural resources were the
ancient approach. It was Dharma of each individual in the society to protect the
natural resources. People worshipped the objects of nature. The trees, the water,
the land and the animals gains important position in the ancient time.
137. Write down the purpose of The Water (Prevention and Control of
Pollution) Act, 1974.
The purpose of The Water Act is “to provide for the prevention and control of
water pollution and the maintenance or restoring wholesomeness of water for the
establishment, with a view to and carrying out the purpose of aforesaid of Boards
for the prevention and control of water pollution, for conferring on and assigning
to such Boards powers and functions relating thereto and for matters connected
therewith”.
138. According to The Air (Prevention and Control of Pollution) Act, 1981
define air pollutant:
The Air Act was passed for the “prevention, control and abatement of air
pollution”. This law defined an air pollutant as “any solid, liquid or gaseous
substance present in the atmosphere in such concentration as may be or tend to be
injurious to human beings or other living creatures or plants or property or
environment”.
139. Mention some important features of Environmental (Protection) Act,
1986:
Some important features of the Environmental (Protection) Act, 1986 are
9. Regulating the handling of hazardous substances
10. Has power to order the closure of the non co-operative industry.
11. Take all necessary steps to protect and improve the quality of environment.
140. Write notes on Manufacture, Storage and Import of Hazardous chemical
Rules, 1989.
These rules are applicable to three different types of flammable substances
and about 450 hazardous chemicals. The importers of hazardous chemicals should
inform the Board authorities of the below given details within 30 days,
12. The place of entry in India
13. The name of address of the importer
14. Mode of transport
15. The quality of the chemicals and
16. The safety details of the product.
16 MARKS
1)Explain in detail about the components of environment?(16)
Hydrosphere (6)
Atmosphere (5)
Lithosphere (5)
2)Explain in detail sustainable development? (16)
Definition (2)
Diagram (4)
Agenda (5)
Example (5)
3)Explain Nitrogen ,Sulphur, Carbon cycles? (16)
Nitrogen cycle
Diagram(3)
Theory (3)
Sulphur cycle
Diagram(3)
Theory (2)
Carbon cycle
Diagram(3)
Theory (2)
4) i)Explain in detail about the man made impacts on water,air,land? (16)
ii)Explain about a)London smog b)Bhopal gas tragedy
i) Man made impacts on Water (4)
Man made impacts on Air (4)
Man made impacts on Land (4)
ii)London smog (2)
Bhopal gas tragedy (2)
5) Explain the concept of sustainable development with necessary examples. (16)
Ecological economics(4)
Concept of sustainable Development (6)
Example(6)
6) Describe in detail about EIA and EIS.
Environmental Impact Assessment (EIA)
- definition
- objective
- types
- EIA report
Environmental Impact Statement (EIS)
- definition
- features
- elements contained
EIA study
- flow chart
7) Explain (i) Environment Management System (MIS) Standard
(ii) Precautionary Principle
(iii) Polluter Pays Principle
Environmental Management System Standards
- ISO
- ISO 14000 series
o Objectives
o Subjects covered under ISO 14000
o Key requirements of ISO 14000
Precautionary Principle
- definition
- basic components of precautionary action
Polluter Pays Principle
- definition
- scope & promoting it.
8) Define Environmental law and explain Indian Environmental Law scenario.
- definition of environmental law
- environmental law in ancient period
- environmental law in British period
- constitutional provisions and the environment
- statement of Supreme court
- fundamental norms recognized by court
- article 253 and environmental legislation
9) Describe the role of non-governmental organizations and community participation in
environmental management
Non-Governmental Organizations
- definition
- classification of groups and their area of activities
- examples
- Green peace
- Conservation International
Community Participation
- definition
- reasons to use collaborative approaches
- example
- EXNORA in India for clean surroundings
10) Write down the functions of Central Pollution Control Board and State Pollution
Control Board in India.
- The Water (Prevention and Control) Act, 1974 and Air (Prevention and
Control) Act, 1981 assigned different functions to the Central / State
Pollution Control Board.
- Functions of CPCB
- Functions of SPCB (atleast 8 points in each)
11.Explain the waste water treatment for municipal solid waste.
G. M. Masters Page :241-252
12.How is hazardous waste managed?
G. M. Masters Page:253-267
13.Discuss about solid waste management.
S.K. Dhameja
14.How can air pollution be controlled?
S.K. Dhameja
15.Explain Green house effect and ozone layer depletion
G.M.Masters384-390
16.Explain various engineering interventions.
Henry & Henike
17.Discuss in detail the waste minimization techniques.
Henry & Henike
18.Explain the clean technology options.
Henry & Henike
19.With flow sheets explain the waste management in paper and pulp industry.
Refer theory from G.M.Masters and draw flow sheets
20.With necessary flow sheets explain the waste management in textile industry.
Refer theory from G.M.Masters and draw flow sheets
21. Explain in detail the physical& chemical properties of water.
Henry & Henike
22. Explain in detail the physical& chemical properties of air.
Henry & Henike
23. Explain in detail the physical& chemical properties of land.
Henry & Henike
24. Explain in detail the Biology of water, soil.
Henry & Henike
25. Explain in detail the Biology of indoor air outdoor air.
KEYWORDS:ENVIRONMENTAL SCIENCE&ENGG,ENVIRONMENTAL SCIENCE&ENGG QUESTION PAPER,ANNA UNIVERSITY QUESTION PAPER,ANNA UNIVERSITY,ANNA UNIVERSITY CHENNAI,ANNA UNIVERSITY COIMBATORE,ANNA UNIVERSITY TRICHY,ANNA UNIVERSITY TIRUNELVELI,ANNA UNIVERSITY MADURAI,ANNA UNIVERSITY SYLLABUS,ANNA-UNIVERSITY RESULTS,ANNA UNIVERSITY DISTANCE EDUCATION,ANNA UNIVERSITY MBA-CENTRE FOR DISTANCE EDUCATION,ANNA UNIVERSITY SCHEDULE OF EXAMINATIONS,ANNA UNIVERSITY ADMISSION,ANNA UNIVERSITY COURSES,ANNA UNIVERSITY ACADEMIC,ANNA UNIVERSITY DEPARTMENTS,ANNA UNIVERSITY RESEARCH,ANNA UNIVERSITY MAIL,ANNA UNIVERSITY QUESTION PAPERS,ANNA UNIVERSITY COUNSELLING DATES,ANNA UNIVERSITY RE-EVALUATION RESULTS
ENGINEERING
SUBJECT CODE:CY1201
ENVIRONMENTAL SCIENCE&ENGG
TWO MARK QUESTIONS-ANSWERS
PREPARED BY
1. S.EMERALD SHIA (L/ECE)
2. R.KALAIVANI (L/EEE)
3. L.FREESIE GRETA (L/CSE)
CY1201 - PRINCIPLES OF ENVIRONMENTAL SCIENCE AND ENGINEERING
2 MARKS
1. Define environment.
‘Environment’ is derived from the French word Environner which means to
encircle or surround. All the biological and non-biological things surrounding an
organism are thus included in environment. Thus environment is sum total of water, air
and land, inter-relationships among themselves and also with the human beings, other
living organisms and property.
2. Write down the components of environment.
The components of environment can be broadly divided into two
1. Abiotic components - composed of all the non living components like
temperature, water, minerals and gases etc
2. Biotic Components - composed of all the living components-plants, animals
and micro-organisms.
The Abiotic components include: 1.Lithosphere 2. Hydrosphere 3.
Atmosphere
The Biotic components include : 1, Producers 2. Consumers 3.
Decomposers
3. Write notes on troposphere
This is the lowest layer of atmosphere. It extends up to 10-12km at mid latitudes,
5-6 km around poles and up to 18 km at equator. It contains water vapors, clouds and
important gases like oxygen and nitrogen. The temperature in this region decreases at the
rate of 5-7 degree centigrade per km.
4. Write notes on Stratosphere
This layer extends up to 50 km above the earths surface. This is a stable layer and
it consists of dry air. The main chemical species of this region is ozone. It protects human
beings from ultra violet radiation, which are emitted from the sun.
5. Write notes on Thermosphere
This layer exists up to 500km above the earth’s surface. The heating of the
thermosphere is due to the absorption of solar energy by atomic oxygen. With in this
layer is the relatively dense band of the charged particles called ionosphere. Worldwide
communication is done using this layer.
6. Why are plants called as producers?
The green plants have chlorophyll with the help of which they trap solar
energy and change it into chemical energy of carbohydrates using simple
inorganic compounds namely water and carbondioxide.As the green plants
manufacture their own food they are known as Autotrpohs.
7, Write the classification of biological environment.
1. Floral/Plant Environment
2. Faunal /Animal Environment
3. Microbial environment
8. What is the structural features of ecosystem?
Composition and organization of biological communities and abiotic components
constitute the structure of an ecosystem
i)Biotic structure:- The plants, animals and microorganisms present in the
ecosystems form the biotic component.
ii)Abiotic structure:- The physical and chemical components of an ecosystem
constitute its abiotic structure. It includes climatic factors, soil factors, geographical
factors, energy, nutrients and toxic substances.
9. What is meant by biotic structure?
The plants, animals and microorganisms present in the ecosystems form the biotic
component. It is classified in to, a) Producers, b) Consumers and c) Decomposers
10. What is meant by abiotic structure?
The physical and chemical components of an ecosystem constitute its abiotic
structure. It includes climatic factors, soil factors, geographical factors, energy, nutrients
and toxic substances. They are classified in to a)Physical factors and b)Chemical factors.
11.What are called Producers?
Producers are mainly the green plants, which can synthesize their food themselves
by making use of CO2 present in the air and water in the presence of sunlight by
involving chlorophyll, through the process of photosynthesis. They are also known as
photo autotrophs.
12. What are called consumers?
All organisms which get their organic food by feeding upon other organisms are
called consumers. The consumers are of the following types,
a)Herbivores
b)Carnivores
c)Omnivores
d)Detritivores
13. What are called Decomposers?
They derive their nutrition by breaking down the complex organic molecules to
simpler organic compounds and ultimately in to inorganic nutrients. Various bacteria and
fungi are decomposers.
14. Define ecology.
Ecology is defined as the study of relationship between organisms and their
environment.
15. Define Ecosystem.
An ecosystem is defined as a natural functional ecological unit comprising of
living organisms and their non- living environment that interact to form a stable selfsupporting
system.
16 . Define energy flow in an ecosystem.
The flow of energy from one trophic level to next trophic level with in an
ecosystem is called energy flow in an eco system.
17. Explain food chain
In food chain each organism eats the smaller organism and is eaten by the larger
ones. All these organisms which are interlinked with each other through food together
constitute a food chain.
16.What is meant by Grazing food chain?
It starts with green plants (primary producers) and culminates in carnivores.
Eg: Grass-grasshopper-Frog-Snake-Hawk.
17.What is meant by Detritus food chain?
It starts with dead organic matter which the detritivores and decomposers
consume. Partially decomposed organic matter and even the decomposers are consumed
by detritivores and their predators.
Eg:- Leaf litter-algae-crabs-small carnivores fish-large carnivorous fish
(Mangrove ecosystem)
Dead organic matter-fungi-bacteria.
18. Explain food web.
Various food chains are often interlinked at different trophic levels to form a
complex interaction between different species from the point of view of food. This
network is called the food web.
19. Define nutrient cycle/ Bio-geochemical cycle/ material cycle.
The cyclic exchange of nutrient material between the living organisms and their
non-living environment is called nutrient cycle. As indicated by the name, the nutrients
circulate through life (bio) and through earth (geo) repeatedly (cycle)
20. Name some of natural impacts on environment.
Some of the natural impacts are
1. Earthquake
2. Tsunamis
3. Flood
4. Volcanic eruption
21. Name some of the anthropogenic impacts on environment.
1. London Smog
2. Mediterranean a dead sea
3. Nuclear explosions
4. Minamata disease
5. Bhopal disaster
6. Chernobyl disaster
7. Gulf war hazards
22. State the theory of classical economics
Adam smith and Thomas Malthus in 1700’s developed the theory of classical
economics, according to this view “ as the population grows, the increasing scarcity of
the finite resources the quality of life, increases competition and ultimately causes
population to fall”.
23. Define sustainable development
sustainable development can be summarized as ‘meeting the needs of the present
without compromising the ability of future generations to meet their own needs.
24. Explain the concept of sustainable development
The concept of sustainable development has the following underlying promises.
1. A symbiotic relationship between the consumer human race and the producer
natural system.
2. Compatibility between ecology and economics.
25. Write short notes on photosynthesis.
The process by which chlorophyll bearing plants use energy from the sun to
convert carbon dioxide and water into sugars is called photosynthesis. The
generalized equation for photosynthesis is,
26. Define mole.
Mole is defined as the amount of substance present in a material. The
term mole can be applied to any particle. In general it is the ratio between
mass and molecular weight of a particle.
27. Define pH.
It is the logarithmic scale used to specify whether a solution is acidic,
basic, or neutral.
28. Define molality.
Molality is defined as the number of moles of solute dissolved in 1000gm
of the solvent.It is another common measurement of concentration
Molality = Number of moles of solute
Weight of solvent
29. Define Molarity.
Molarity is defined as the number of moles of the solute present in 1000ml
of the solution.
Molarity = Number of moles of solute
Volume of solution
30. Define Hardness of Water.
Hardness of water is defined as the property of Water which consumes
more soap to produce foam or lather. It is due to the presence of certain salts
of calcium, magnesium and other heavy metals dissolved in it.
31. Differentiate between Temporary hardness and Permanent hardness
Temporary hardness is due to the presence of dissolved bicarbonates of calcium,
magnesium and other heavy metals and the carbonates of iron. It is mostly destroyed
by heating.
Permanent hardness is caused due to the presence of chlorides and
sulphates of calcium, magnesium, iron and other metals. This is not
destroyed by heating.
32. Define buffering capacity of water.
Buffering capacity is the ability of water to maintain a stable pH value
even if acids or bases are added.
33. Define Turbidity.
Turbidity in water is a measure of the resistance of water to the passage
of light through it.
34. Define permeability of soil,
It is defined as the ability of movement of water through the pore spaces
of soil particles.
35. What are the principle nutrients required for algae.
i) Nitrogen
ii) Phosphorus
iii) Carbon dioxide
36. List the properties of acid and base.
A solution for which the hydrogen ions are greater are than the hydroxyl ions, it is
called as acid.
A solution for which the hydroxyl ions are greater than hydrogen ions, it is
called as base.
37. Define Chemical oxygen Demand
This is defined as the amount of oxygen required for chemical oxidation of
the organic matter and other reducing agents present in waste water.
38. List some physical properties of water.
Color
Temperature
Turbidity
Taste and odour.
39. Define Bio chemical oxygen demand.
BOD is defined as the quantity of dissolved oxygen required by bacteria
for the oxidation of organic matter under aerobic conditions
40. What is an point source pollution.
Polluted water discharged from specific locations such as drain pipes,
ditches, etc. are called point source pollution.
41. What is an non-point pollution ?
Water pollution caused in a scattered or diffuse manner having no specific
origin or point of entry into a particular body of water are called non-point
pollution sources.
42. List the different types of fresh water algae?
i)Green algae ii)Motile green algae iii)Blue green algae. iv)Brown algae.
43. Explain the basic classification of micro organism.
i) Bacteria ii) Fungi iii) Algae iv) Protozoa v) Viruses
44. What is an indicator organism?
The detection of pathogens in routine water analysis is difficult,
uneconomical and impractical. Instead water is tested using a surrogate that
is an indicator of fecal contamination.
Example: total coliforms, fecal streptococci and clostridium perfingens
45. Calculate the number of moles of CO2 in 44 g of CO2?
Number of moles = Mass / Molecular Mass
= 44 / 44
=1 mole.
46. Calculate the pH of a solution with [H+]=3.4x10-4 mol/l
pH = - log10[H+]
= - log10(3.4) – log10(10-4 )
= - 0.534 + 4
= 3.47
47. What is a policy?
A policy is a plan or statement of intent –either written or stated – about a
course of action or inaction intended to achieve certain goals.
48. Write the pH of i)Human blood ii)Lemon juice iii)Wine iv)Distilled water
Human blood : 7.5
Lemon juice : - 2
Wine : - 4
Distilled water : 7
49. What is an saturated solution?
This is a solution, which contains as much solute as it can dissolve in the
presence of solvent at a given temperature.
50. Name all the mass/mass units used for representing concentration of
solution?
i)percent by weight
ii)parts per million
iii)molality
iv)mole fraction
51. What is meant by air pollution?
Air pollution may be defined as the presence of impurities in excessive quantity
and duration to cause adverse effects on plants, animals, human beings and materials.
52. What are the main sources of air pollution?
Natural sources and
Man made or anthropogenic sources
53. List the types of air pollutants.
Particulate pollutants
Gaseous pollutants
54. What do you understand by suspended particulate?
Suspended particulate matter is a complex mixture of small and large particles
with size less than 100μ varying origin and chemical composition. The largest source
of particulate matter is coal-fired power plants, but auto and diesel exhaust are also
prime contributors, especially along busy transportation corridors.
55. Write short note on color-coding of biomedical waste.
In order to dispose the biomedical waste safely and economically it is necessary
to collect the waste by suitable segregation. The system of using different color bags
to collect different types of medical waste is known as color-coding. The biomedical
waste can be divided into 3 categories according to the colors,
Yellow bag waste - Eg: Human anatomical waste-Should be incinerated or
deeply buried Red bag waste - Eg: Plastic waste-Should be disinfected
with chemicals
Black bag waste - Eg: Incinerated ash-Should be disposed for landfills.
56. How can exhaust reduction be done in vehicles?
The exhaust deduction in the vehicle may be achieved to some extend by adopting
the following technique.
Catalytic converters
Manifold air injection
Fundamental engine modification
57. Write short note on radioactive property of hazardous waste.
In the spontaneous break down of the nucleus of an atom, mainly three types of
radioactive materials are found to be hazardous namely:
a particles, b particles, g radiations.
The a particle emission occurs mainly in radioactive isotope and the b radiations
are the electron released from a radioactive nucleus. The g radiations are
electromagnetic radiation traveling at speed of light.
58. How can you control the emission of nitrogen oxides? OR Explain EGR
method.
Since high temperature favors the production of nitrogen oxide, the emission may
be controlled by lowering the combustion temperature. This can be achieved by recirculating
the exhaust gases, which will no longer burn. Hence it will not produce
any heat if re-circulated and will quench the heat of the combustion gases. This
method is called Exhaust Gas Recirculation(EGR). The temperature in the cylinder
ranges from 500oC and the end of compression stroke (before ignition) to about 3000-
oCts, disturbances and
organisms across the area.
62. What are the main components of municipal solid waste?
Garbage (or) food waste
Rubbish
Ashes and Residues
Special wastes
Construction and demolition wastes
Treatment plant waste
63. Define green house effect.
The green house effect is a naturally occurring process that makes the earth
warmer by trapping more energy in the atmosphere. The green house gases absorb
and hold heat from the sun, preventing it from escaping back into the space.
64. Define global warming
Global warming is defined as the increase in temperature of the earth, which
causes more changes in climate.
65. What are the effects of global warming?
More heat waves
Expansion of desert area
Natural fires in forest land
More evaporation of water from oceans and water bodies
Melting of ice caps in artic and Antarctica regions
More cloud formation in the atmosphere
Rise in sea level
More drought
More impacts on plants, animals and humans.
66. Define screening and skimming.
The process of removing the large matters from sewage by allowing it to pass
through screens is called screening.
The process of removal of floating matters such as oils, grease, etc by skimming
tanks is called as skimming.
67. Name any three disinfection method
Chlorination, Ozonation, UV treatment
68. What are the types of autoclave systems used in treatment of biomedical
waste?
Gravity system
Pre vacuum system
Retort type systems
69. When is a waste said to be hazardous?
A waste is said to be hazardous if it posses one or the more of the following
characteristics
Toxicity
Reactivity
Ignitability
Radioactivity
Corrosivity
70. What are major vehicle pollutants?
The major pollutants due to vehicles are
Carbon monoxide
Hydrocarbons
Oxides of nitrogen
Lead components and
Suspended particulate matter.
71. Write short note on nitrification / denitrification
An approach to nitrogen control utilizes aerobic bacteria to convert
ammonia(NH4
+) to (NO2
-) which is nitrification followed by an anaerobic stage in
which different bacteria converts nitrates to nitrogen gas(N2) which is denitrification.
The overall process is referred to as nitrification / denitrification.
72. Explain drying and dewatering.
The shredded waste material is pre-dried to decrease its weight by removing the
amount of moisture. If there is any need for incineration of sludge from treatment
plants, then dewatering is essential.
73. What are the two main classifications in sources of radioactive pollution?
Natural sources
Man-made sources
74. What is half-life of a radioactive substance?
The half-life of a radioactive substance is defined as the time taken for decaying
half of the material present.
75. What are the factors to which the effect of radioactive pollutants depend on?
Duration of exposure to the radiation
Strength of the radiation
Half life period of the radioactive pollutant
Rate of diffusion of the pollutant
Environmental conditions
76. What is DRE?
DRE refers to the destruction and removal efficiency that evaluates the
measurement of qualitative functioning of an incinerator. A DRE value of 99.99
indicates that one molecule of an organic compound is released in to the atmosphere
for every 10,000 molecules of pollutant treated by the incinerator.
77. What is flow diagram and what are its advantages?
Flow diagram is a graphical representation of various processes involved in
various methods of treatment plant. The advantages are
i) It shows the sequential processes involved in a particular type of treatment
method.
ii) Easy to understand and can easily identify if anything goes wrong.
78. What are the objectives of waste minimisation?
i) Reduced hazard to human health from the generation of toxic wastes.
ii) Preventing environmental degradation caused by unnecessary release of
waste materials.
iii) Reduced the waste disposal and its cost reduction.
79. What are the factors involved in the amount of waste generation process?
i)House keepinng practices
ii)Extent of process control.
iii)Product quality requirements and initiative.
iv)Managing system and initiative.
80. What is the aim of national committee of environmental planning and coordination.
i)Conservation of natural resources.
ii)Control of environmental pollution.
iii)Environmental education.
iv)Environmental laws.
81. What is waste treatment?
Waste treatment technique or process change the physical,chemical and biological
character of waste.
82. What are the objectives of waste treatment?
i)To recover the material or energy resources from the waste.
ii)To neutralise the waste.
iii)To reduce the volume of waste.
83. What is an clean technology?
Clean technology is an integrated preventive environmental and business strategy
which uses fewer raw materials, less energy and generate less waste than an existing
technology. It produces products and provide services at a higher efficiency
,increased profitability and reduces risk to the environment.
84. What are the advantages of clean technology?
i)It helps to use fewer raw materials and energy and generate less waste.
ii)It helps to ensure worker safety.
iii)It reduce the impacts for products along the entire life cycle from material
extraction to disposal.
85. What are the steps to be taken to implement cleaner production in an
industry.
i)Undertake environment review and create the awareness of environmental
issues.
ii)Establish environmental policy duly acknowledged by the executive officer.
iii) Carry out environmental audit on suppliers of services.
86. What do u mean by end of pipe approach?
In this case waste treatment is done at the end of pipe (ie) after the manufacturing
process is over. Steps are taken to mininise the waste during the manufacturing
processes and also the generated wastes are not reused. Therefore ,the waste treatment
alone is called End of Pipe approach.
87. What is environmental waste audit?
The most important process, which reveals the actual generation of waste in an
industrial unit, is the waste audit.
88. What are the important points of good waste audit?
i) Help set targets for waste reduction.
ii) Increase knowledge of the production process.
iii)Help to improve process efficiency.
89. How the waste audit is divided?
a) Pre assessment
b) Material balance
c) Synthesis.
90. What is disposal?
Disposal is the discharge, deposit, injection, dumping, spilling, leaking or placing of waste in
to or any land, water or air.
91. What is standard of performance?
The minimum allowable concentration of each chemical agent in a waste water or
effluent that is prepared by suitable acts or amendments is called standard
performance.
92. What is the objective role of standards of performance in the control of
pollution?
The standards of performance function to monitor and assess the overall
concentration of toxic pollutants in the effluent and enable the analyst or investigators
to check whether the prescribed limit of those pollutants do not exceed the allowable
level.
93. Mention the standards of a few chemical parameters in the oil refinery
industry.
1.Phenol 0.7 kg/1000 tones of crude processed
2.Sulphide 0.35 kg/1000 tones of crude processed
3.BOD at 200c 10.5 kg/1000 tones of crude processed
4.Suspended solids 14 kg/1000 tones of crude processed
94. Mention the standards of a few chemical parameters in the cotton textile
industry
1.pH 5.5 to 9.0
2.Suspended solids 100 mg/lit
3.BOD at 20 0 c 150 mg/lit
4.Sulphides 2.0 mg/lit
5.Total chromium content 2.0 mg/lit
95. What is the percentage removal of suspended solids and BOD in primary
treatment?
The primary treatment is aimed to remove 60% of suspended solids and
40% of BOD.
96. What are the elements of waste minimisation strategy?
a. Reduction at source
b. Recycle/Reuse
c. Treatment
d. Disposal.
97. What are the possible solutions of waste disposal?
i)Install a fume incinerator.
ii)Install a condenser to recover the solvent for reuse
98. What is MINAS?
Effluent standards were designed on techno economic grounds called the ’Minimal National
Standards’
99. What is LSS?
Effluent standards are calculated on the basis of the assimilative capacity of the receiving
environment, called the ‘Location Specific Standard’
100. What are the operations included in ETP?
The operations included in ETP(effluent Treatment Plants) are
i)Blending
ii)Equalization
iii)Neutralization
iv)Precipitation
v)Chemical or Biological Oxidation
101. Define Environmental Impact Assessment.
Environmental Impact Assessment (EIA) can be defined as the systematic identification and
evaluation of the potential impacts (effects) of proposed projects, plans, programs, or legislative
actions relative to the physical-chemical, biological, cultural, and socioeconomic components of
the total environment.
102. Write down the objective of EIA:
The objective of Environmental Impact Assessment (EIA) is to ensure that
environmental aspects are addressed and potential problems are foreseen at the
appropriate stage of project design. EIA should be envisaged as an integral part of
the planning process and initiated at the project level from the start.
103. What is the need of EIA?
All the developmental activities are proposed to facilitate the public. For that the resources are
used more and that may alter and affect the environmental parameters. Hence this EIA is
carried out in order to ensure the depletion of resources and the alterations and effects on the
quality of environmental parameters.
104. What are the goals of EIA?
The goals of EIA are:
Conservation of resources.
Minimization of wastes.
Recovery of by-products.
Utilization of efficient equipments.
105. List the key elements of EIA.
Organizing the job.
Assessment performance.
Preparation of Environmental Impact Statement.
Reviewing of Environmental Impact Statement.
Approval of Plan with or without modifications.
106. Define Environmental Impact Statement (EIS)
An Environmental Impact Statement (EIS) is a detailed written statement
which serves as an action-forcing device, provides full and fair discussion of
significant environmental impacts and must inform the decision makers and
public the reasonable alternatives which would avoid or minimize adverse
impacts or enhance the quality of human environment.
107. Write down the types of EIA:
There are two types of EIA.
i. Rapid EIA
ii. Comprehensive EIA
Rapid EIA is done quickly based on one season data whereas
Comprehensive EIA will be detail and normally takes at least one year for its
preparation.
108. Write down some of the benefits of EIA:
The benefits of the EIA are,
i. Reduce cost and time of project implementation
ii. Increase project acceptance and improve project performance.
iii. Avoid impacts and violations of laws and legislations.
iv. Improved human health and maintenance of biodiversity.
v. Decreased resource use and fewer conflicts over natural
resource use.
109. Write down the major objectives of ISO 14000 series:
The major objectives of ISO 14000 series is to promote more effective and
efficient environmental management in organization and to provide useful and
usable tools-ones that are cost-effective, system based, flexible and reflect the
best organizational practices available for gathering, interoreting and
communicating environmentally relevant information. The intended end result is
the improvement of environmental performance.
110. Write down the subjects covered under various ISO 14000 :
ISO 14000 – 14009 : Environmental Management Systems
ISO 14010 – 14019 : Environmental Audit
ISO 14020 – 14029 : Environmental Labeling
ISO 14030 – 14039 : Environmental Performance Evaluation
ISO 14040 – 14049 : Life Cycle Assessment
ISO 14050 – 14059 : Terms and Definitions
ISO 14060 : Environmental Aspects in Product Stand
111. Write down the key requirements specified under ISO 14000:
The key requirements specified under ISO 14000 are,
vi. Environment access
vii. Planning
viii. Implementation and operation
ix. Checking and corrective action
x. Management review
112. Write notes on Precautionary Principle:
The precautionary principle emphasizes that we should plan a margin of
safety for error or surprises in natural systems. In other words, when human
health or the environment are threatened, precautionary measures should be taken
even if cause-and-effect relationships are not fully established scientifically.
113. What is the beneficiary pays principle?
According to this principle,’ the people who get benefited due to an activity,
which increases the pollution, should pay for that’.
114. What do you know about risk management?
Risk management is a process of resolving various policies regarding
acceptable risk. It consists of risk assessment and risk control.
115. Define risk assessment?
Risk management is defined as the process of identifying, quantifying and
evaluating the risk. . It contains risk determination and risk evaluation.
116. What are the activities covered in risk assessment?
Risk identification.
Risk estimation.
Risk acceptance.
Risk aversion.
117. Write notes on Polluter Pays Principle:
The basic environment law of the land requires that a polluter bear the
remedial or clean-up costs as well as the amount payable to compensate the
victims of pollution. This is known as the ‘polluter pays princial quality, natural resources and ecological sustainability.
121. What are the major constitutional provisions in India for environmental
protection?
Article 47.
Article 48-A.
Article 51-A (g).
Article 253.
122. State the Article-47 of the Indian Constitution.
Article 47 of the Constitution states that, "The State is to ensure as its primary duty
of,
1.Raising standard of living of its people,
2.To increase the level of nutrition of the people,
3.To bring improvement in public health".
123. State the Article 48-A of the Indian Constitution.
Article 48-A of the Constitution states that, "the State shall endeavor for
protection and improvement of the environment and for safeguarding the forest and
wild life and improving the natural environment of the country".
124. State the Article 51-A(g) of the Indian Constitution.
According to Article 51-A(g) of the Constitution, it shall be the duty of every
citizen of India 'to protect and improve the natural environment including forests,
lakes, rivers ,and wild life and to have compassion for living creatures'.
125. State the Article 253 of the Indian Constitution.
Article 253 of the Constitution empowers the parliament to make laws regarding
preserving the environment. It states 'The parliament has power to make any law for
the whole or any part of the territory of India for implementing any treaty,
agreement or convention with any other country or countries or any decision made
at any international conference, association or other body'.
126. List the major environmental conventions of 20th century.
1.World summit on sustainable development
2.The Earth Summit
3.World conference on women.
127. Name some of the acts enacted by the Indian Government to protect the
environment.
1.The Water (prevention and control of pollution) Act 1974
2.The Water (prevention and control of pollution) Cess Act 1977
3.The Air (prevention and control of pollution) Act 1981
4.The Environment (protection) Act 1986
5.The Public Liability Insurance Act 1991.
128. What are the common objectives of environmental legislation?
All the Acts were enacted to achieve the following:
1.To control further damage to the environment and ecosystem
2.To conserve the environment
3.To restore the environment in areas damaged including such measures as
reclamation of degraded land.
4.To create authorities to administer the policy and contents of the legislation.
5.To provide penalties and prosecution for violation of laws.
129. List the major environmental protocols of 20th century.
1.Kyoto protocol
2.Montreal protocol.
130. Write notes on NGOs:
The groups working for social changes are called Non-Governmental
Organizations (NGOs). When the activities are concerned with environmental
issues they are called environmental NGOs.
131. Write notes on ‘Green Peace’:
‘Green peace’ is one of the largest NGOs in the world with 1.6 million
contributing members, carries out well-publicised confrontations with toxic waste
dumpers, seal hunters and others who threaten very specific and visible resources.
132. List some of the NGOs available in India.
1.World Wide Fund for Nature India.
2.Indian Environmental Association, Mumbai.
3.Environmental Society of India (ESI), Chandigarh.
4.Sastrakalayatha, Kerala.
5.C.P.Ramaswami Ayer Environmental Education Centre.
6.Centre for Environmental Education, Ahmedabad.
7.Friends of River Narmada.
8.Madras Environmental Society, Chennai.
9.Eklavya, Madhya Pradesh.
10.SEARCH, Bangalore.
133. How does the community participation involve in protecting the
environment?
Community participation requires involvement in several areas:
1.Better theoretical knowledge about the environmental information (both
Scientific and traditional)
2.Better practical guidelines and tools are need.
3.Better educational support.
4.Ethical inconsistencies in environmental decision-making are illuminated
and kept to a minimum.
134. Write short notes on the history of implementation of international
treaties and conventions.
Over the past 25 years, more than 170 treaties and conventions have been
negotiated to protect our global environment. These are mainly designed to
regulate the following activities:
3. Intercontinental shipping of hazardous waste
4. Reforestation
5. Over-fishing
6. Trade in endangered species
7. Global warming and
8. Wildlife protection.
135. Mention the standards in EPR:
There are three types of standards mentioned in Environment Protection Rules (EPR),
a. Source standards, which require the polluter to restrict the emission and discharge
of environmental pollutants at source.
b. Product standards, which fix the pollution norms for new manufactured products
such as car.
c. Ambient standards, to set maximum pollutant loads in the air and to guide
regulation on the environmental quality that ought to be maintained for healthy
living.
136. Write notes on environmental law in ancient period in India:
Production, conservation and judicious use of natural resources were the
ancient approach. It was Dharma of each individual in the society to protect the
natural resources. People worshipped the objects of nature. The trees, the water,
the land and the animals gains important position in the ancient time.
137. Write down the purpose of The Water (Prevention and Control of
Pollution) Act, 1974.
The purpose of The Water Act is “to provide for the prevention and control of
water pollution and the maintenance or restoring wholesomeness of water for the
establishment, with a view to and carrying out the purpose of aforesaid of Boards
for the prevention and control of water pollution, for conferring on and assigning
to such Boards powers and functions relating thereto and for matters connected
therewith”.
138. According to The Air (Prevention and Control of Pollution) Act, 1981
define air pollutant:
The Air Act was passed for the “prevention, control and abatement of air
pollution”. This law defined an air pollutant as “any solid, liquid or gaseous
substance present in the atmosphere in such concentration as may be or tend to be
injurious to human beings or other living creatures or plants or property or
environment”.
139. Mention some important features of Environmental (Protection) Act,
1986:
Some important features of the Environmental (Protection) Act, 1986 are
9. Regulating the handling of hazardous substances
10. Has power to order the closure of the non co-operative industry.
11. Take all necessary steps to protect and improve the quality of environment.
140. Write notes on Manufacture, Storage and Import of Hazardous chemical
Rules, 1989.
These rules are applicable to three different types of flammable substances
and about 450 hazardous chemicals. The importers of hazardous chemicals should
inform the Board authorities of the below given details within 30 days,
12. The place of entry in India
13. The name of address of the importer
14. Mode of transport
15. The quality of the chemicals and
16. The safety details of the product.
16 MARKS
1)Explain in detail about the components of environment?(16)
Hydrosphere (6)
Atmosphere (5)
Lithosphere (5)
2)Explain in detail sustainable development? (16)
Definition (2)
Diagram (4)
Agenda (5)
Example (5)
3)Explain Nitrogen ,Sulphur, Carbon cycles? (16)
Nitrogen cycle
Diagram(3)
Theory (3)
Sulphur cycle
Diagram(3)
Theory (2)
Carbon cycle
Diagram(3)
Theory (2)
4) i)Explain in detail about the man made impacts on water,air,land? (16)
ii)Explain about a)London smog b)Bhopal gas tragedy
i) Man made impacts on Water (4)
Man made impacts on Air (4)
Man made impacts on Land (4)
ii)London smog (2)
Bhopal gas tragedy (2)
5) Explain the concept of sustainable development with necessary examples. (16)
Ecological economics(4)
Concept of sustainable Development (6)
Example(6)
6) Describe in detail about EIA and EIS.
Environmental Impact Assessment (EIA)
- definition
- objective
- types
- EIA report
Environmental Impact Statement (EIS)
- definition
- features
- elements contained
EIA study
- flow chart
7) Explain (i) Environment Management System (MIS) Standard
(ii) Precautionary Principle
(iii) Polluter Pays Principle
Environmental Management System Standards
- ISO
- ISO 14000 series
o Objectives
o Subjects covered under ISO 14000
o Key requirements of ISO 14000
Precautionary Principle
- definition
- basic components of precautionary action
Polluter Pays Principle
- definition
- scope & promoting it.
8) Define Environmental law and explain Indian Environmental Law scenario.
- definition of environmental law
- environmental law in ancient period
- environmental law in British period
- constitutional provisions and the environment
- statement of Supreme court
- fundamental norms recognized by court
- article 253 and environmental legislation
9) Describe the role of non-governmental organizations and community participation in
environmental management
Non-Governmental Organizations
- definition
- classification of groups and their area of activities
- examples
- Green peace
- Conservation International
Community Participation
- definition
- reasons to use collaborative approaches
- example
- EXNORA in India for clean surroundings
10) Write down the functions of Central Pollution Control Board and State Pollution
Control Board in India.
- The Water (Prevention and Control) Act, 1974 and Air (Prevention and
Control) Act, 1981 assigned different functions to the Central / State
Pollution Control Board.
- Functions of CPCB
- Functions of SPCB (atleast 8 points in each)
11.Explain the waste water treatment for municipal solid waste.
G. M. Masters Page :241-252
12.How is hazardous waste managed?
G. M. Masters Page:253-267
13.Discuss about solid waste management.
S.K. Dhameja
14.How can air pollution be controlled?
S.K. Dhameja
15.Explain Green house effect and ozone layer depletion
G.M.Masters384-390
16.Explain various engineering interventions.
Henry & Henike
17.Discuss in detail the waste minimization techniques.
Henry & Henike
18.Explain the clean technology options.
Henry & Henike
19.With flow sheets explain the waste management in paper and pulp industry.
Refer theory from G.M.Masters and draw flow sheets
20.With necessary flow sheets explain the waste management in textile industry.
Refer theory from G.M.Masters and draw flow sheets
21. Explain in detail the physical& chemical properties of water.
Henry & Henike
22. Explain in detail the physical& chemical properties of air.
Henry & Henike
23. Explain in detail the physical& chemical properties of land.
Henry & Henike
24. Explain in detail the Biology of water, soil.
Henry & Henike
25. Explain in detail the Biology of indoor air outdoor air.
KEYWORDS:ENVIRONMENTAL SCIENCE&ENGG,ENVIRONMENTAL SCIENCE&ENGG QUESTION PAPER,ANNA UNIVERSITY QUESTION PAPER,ANNA UNIVERSITY,ANNA UNIVERSITY CHENNAI,ANNA UNIVERSITY COIMBATORE,ANNA UNIVERSITY TRICHY,ANNA UNIVERSITY TIRUNELVELI,ANNA UNIVERSITY MADURAI,ANNA UNIVERSITY SYLLABUS,ANNA-UNIVERSITY RESULTS,ANNA UNIVERSITY DISTANCE EDUCATION,ANNA UNIVERSITY MBA-CENTRE FOR DISTANCE EDUCATION,ANNA UNIVERSITY SCHEDULE OF EXAMINATIONS,ANNA UNIVERSITY ADMISSION,ANNA UNIVERSITY COURSES,ANNA UNIVERSITY ACADEMIC,ANNA UNIVERSITY DEPARTMENTS,ANNA UNIVERSITY RESEARCH,ANNA UNIVERSITY MAIL,ANNA UNIVERSITY QUESTION PAPERS,ANNA UNIVERSITY COUNSELLING DATES,ANNA UNIVERSITY RE-EVALUATION RESULTS